Piedinature - Pinouts
Amiga Video Expansion

Torna alla Home Page di Jack
Torna alla pagina delle informazioni tecniche
Torna alla pagina dei Pinouts


[UNKNOW]

36+54 PIN EDGE CONNECTOR at the computer.

Pin Name Dir Description
1 RGB16 OUT Red Bit 0
2 RGB17 OUT Red Bit 1
3 LINELF OUT Audio Line Out Left
4 LINERT OUT Audio Line Out Right
5 C28D OUT Pixel-Synchronous Clock
6 +5V - +5 Volts DC (1 A)
7 ARED OUT Analog Red
8 +5V - +5 Volts DC (1 A)
9 GND - Digital Ground
10 +12V - +12 Volts DC (40 mA)
11 AGREEN OUT Analog Green
12 GND - Digital Ground
13 GND - Digital Ground
14 /CSYNC OUT Composite Sync
15 ABLUE OUT Analog Blue
16 /XCLKEN IN Genlock Clock Enable
17 GND - Digital Ground
18 BURST OUT Burst Gate
19 /C4 OUT 3.55/3.58 MHz Clock
20 GND - Digital Ground
21 GND - Digital Ground
22 /HSYNC OUT Horizontal Sync (47 Ohm)
23 RGB4 OUT Blue Bit 4
24 GND - Digital Ground
25 RGB7 OUT Blue Bit 7
26 /VSYNC OUT Vertical Sync (47 Ohm)
27 RGB15 OUT Green Bit 7
28 BLANK OUT Video Blank
29 RGB23 OUT Red 7
30 /PIXELSW OUT Genlock Overlay (47 Ohm)
31 -5V - -5 Volts DC
32 GND - Digital Ground
33 /XCLK IN Genlock Clock
34 /C1 OUT C1 Clock
35 +5V - +5 Volts DC (1 A)
36 PSTROBE OUT Printer Port Handshake
       
1 GND - Digital Ground
2 RGB20 OUT Red Bit 4
3 RGB21 OUT Red Bit 5
4 RGB22 OUT Red Bit 6
5 GND - Digital Ground
6 RGB12 OUT Green Bit 4
7 RGB13 OUT Green Bit 5
8 RGB14 OUT Green Bit 6
9 GND - Digital Ground
10 RGB5 OUT Blue Bit 5
11 RGB6 OUT Blue Bit 6
12 GND - Ground
13 SOG OUT Sync-On-Green Indicator
14 TBASE OUT 50/60 Hz Software Clock Timebase
15 CDAC OUT 7.09/7.16 MHz Clock
16 PPOUT IN/OUT Printer Port Paper Out
17 /C3 OUT 3.55/3.58 MHz Clock
18 PBUSY IN/OUT Printer Port Busy
19 /LPEN IN Light Pen Input
20 /PACK IN/OUT Printer Port Acknowledge Handshake
21 PSEL OUT Printer Port Select
22 GND - Digital Ground
23 PPD0 IN/OUT Printer Port Data Bit 0
24 PPD1 IN/OUT Printer Port Data Bit 1
25 PPD2 IN/OUT Printer Port Data Bit 2
26 PPD3 IN/OUT Printer Port Data Bit 3
27 PPD4 IN/OUT Printer Port Data Bit 4
28 PPD5 IN/OUT Printer Port Data Bit 5
29 PPD6 IN/OUT Printer Port Data Bit 6
30 PPD7 IN/OUT Printer Port Data Bit 7
31 /LED OUT LED (Audio filter bypass) Setting
32 GND - Digital Ground
33 RAWLF OUT Raw (Unfiltered) Audio Left
34 AGND - Audio Ground
35 RAWRT OUT Raw (Unfiltered) Audio Right
36 AGND - Audio Ground
37 n/c - Reserved for future expansion
38 n/c - Reserved for future expansion
39 GND - Digital Ground
40 GND - Digital Ground
41 n/c - Reserved for future expansion
42 n/c - Reserved for future expansion
43 GND - Digital Ground
44 GND - Digital Ground
45 RGB18 OUT Red Bit 2
46 RGB19 OUT Red Bit 3
47 RGB8 OUT Green Bit 0
48 RGB9 OUT Green Bit 1
49 RGB10 OUT Green Bit 2
50 RGB11 OUT Green Bit 3
51 RGB0 OUT Blue Bit 0
52 RGB1 OUT Blue Bit 1
53 RGB2 OUT Blue Bit 2
54 RGB3 OUT Blue Bit 3

Note: Direction is Motherboard relative Card.
Note: Do not mix analog & digital grounds.


Torna alla Home Page di Jack
Torna alla pagina delle informazioni tecniche
Torna alla pagina dei Pinouts

(C) 2003-2024 Jack aka JackMauro aka Mauro